Home Products Good Seal Products Equipment Mobile Skid Mounted Mixer Sealer Tanks

Print View

Mobile Skid Mounted Mixer Sealer Tanks MIXERS FOR SPRAYING COAL TAR AND ASPHALT EMULSION SEALING PRODUCTS Skid mounted 39" wide x 12' long Tank capacities from: 300, 500, 1000, 1500 gallons Full sweep blade mixer with rubber squeegee wipers operates in either forward or reverse direction Side mounted ladder for easy and safe loading Large, hinged loading door with steel safety screen Large lifting hooks Dual sided hose hangers 50 ft. of high pressure spray hose and aluminum wand 5 ft. long with 80/70 tip Air operated gear reducer for agitation system, with adjustable speed control 8 HP Kohler Magnum gas engine with rope start; mounted on air compressor 175 PSI, 90 CFM air compressor, complete with all filters, regulators, and lubrication Built in surge system for uniform spraying of sealer Built in suction system to load from drums or tanks. 10 ft. long 2" diameter heavy duty suction hose with quick couplers 1 1/2" Wilden M2 air diaphragm pumping system In line material strainer SEALER TANK WITH HAND AGITATOR G1610 Model 300 HA G1630 Model 550 HA G1660 Model 1000 HA SKID MOUNTED SEALER TANK WITH AIR POWERED AGITATOR G1620 Model 300 APA G1640 Model 550 APA G1650 Model 1000 APA SKID MOUNTED SEALER TANK WITH HYDRAULIC POWERED AGITATOR G1670 Model 300 HPA G1680 Model 550 HPA G1690 Model 1000 HPA SKID MOUNTED SEALER TANK W/AIR POWERED AGITATOR & AIR PUMP G1700 Model 300 APA-ADP G1710 Model 550 APA-ADP G1720 Model 1000 APA-ADP SKID MOUNTED SEALER TANK W/HYDRAULIC POWERED AGITATOR & ROPER PUMP G1730 Model 300 HPS-HRP G1740 Model 550 HPS-HRP G1750 Model 1000 HPS-HRP OPTIONS G1802    Material Strainer 2" female pipe thread, 10" high mesh screen for skid spray unit G1802A  Material Basket Strainer Large or Small G1802D  Air Regulator For all spray units G1802E  Material Pumps Graco 1" Model D73666 Huskey 1040 G1802F  Seal Kit For above pump D07666 G1802H  Seal Kit For pump No. DOB666 (for 1-1/2" pump) G1802I  Steel Water Tank For brush cleaning and storage SPECIFICATIONS * For all 300 and 550 gallon units, the steel tank is 12 gauge mild steel. * The 1000 gallon tanks are 10 gauge mild steel. * The three steel tanks with a pump system measure approximately: * 300 Gallon 37"W x 144"L * 550 Gallon 48"W x 144"L * 1000 Gallon 65"W x 144"L * The entry doors on the top of units measure 24"L x 16"W, with a raised lip of 4"H and each contain a safety screen. * All tank agitators have a 1-1/2" diameter steel shaft, with 3/8" keyway, and has 4 paddles. * Each unit has sealed bearrings to support the agitator shaft on each end. * All spray units come standard with 50 feet of 3/4" high-pressure hose and a 5' aluminum spray wand. Brackets are used to store the hose and wand on unit. * The piping on the spray unit comes with 2" steel piping, valves and fittings as needed. * Each spray unit comes standard with one 6' long, 2" diameter suction/discharge hose with quick coupler on one end. * All units have steel lifting eyes on the top of the tank for easy loading and unloading from the transport unit. * All air spray units come standard with an air compressor and a pull start 13 HP Honda gasoline engine. It has a 30 gallon air tank that delivers 90 CFM at 175 PSI. The material air diaphragm pump is a Graco Huskey pump that has a 1-1/2" outlet and a 1-1/2" "out" outlet. * All gravity type Good Seal Mixer tankscome with legs welded to the tank for support. Note: No skid. * The units have a hand crank for the mixing of the material in tank. * All units are primed and painted black. * All hydraulic units come with a 10 HP Briggs and Stratton gasoline pull start engine. The pumping system has a 2" roper material pump with a 2" discharge hose. Note: Remember, when using a roper pump system, the pump is NOT designed to handle sealer with a silica sand added to it. The silica sand will destroy the roper pump very quickly. * Specifications subject to change without notice.