Crafco E-Z Series II 1000 |
| The all new EZ Series II is the fourth generation of Crafco melter. The EZ Series II has taken the best of the EZ-Pour, added a heated hose and electronic controls making it the highest efficiency machine available. Automatic electronic controls and modular design features add to the usability of the Series II. We have the highest heat efficiency ratio and the fastest heat up time of any machine on the market.
The all new EZ Series II offers heated or unheated applicator hose options, the largest commercial air compressor as well as such labor saving options as the autoloader and integrated engine gauges. The heat jacket fins and the heat tower coupled with the best insulation provide a fast heat-up and recovery time.
The two inch rugged sealant pump coupled with true on demand pumping give the Series II the ability to apply hot pour, fiber and coal tar sealants quickly and efficiently.
S51177 Crafco Auto Loader
NEW FEATURES
- New center heat tower heats sealant from all sides. The furthest distance heat must travel is11 inches resulting in a faster heat-up time.
- The surface of the agitation paddles is 108 square inches and they are no more than 3 inches from the tank edge.
- The agitation speed is controlled for maximum efficiency.
- New self adjusting sliding boom increases operator head clearance to 6’5”, allows for 7’ of travel and increases hose movability.
-
New center heat tower heats sealant from all sides. The furthest distance heat must travel is11 inches resulting in a faster heat-up time.
OPTIONS
• Engine Cover • Gravity Feed • Arrow Board Kit • Surge Brakes • Engine w/ Gauges
• Auto Loader • 50, 70, CFM, Compressor • Custom Paint • Hitch Selection
• Electric Pin Selection • Hitch Extension • Cab Brake Control
• Break-away Battery w/ charger • Locking Battery Box • Light Bar
• Overnight Heater • Fire Extinguisher • Tool Box • Safety Hooks • Mud Flaps
• Spare Tire Kit
SEALING TIPS
Crafco Duckbull
Use with Super Shot Melter wands to prevent material dripping.
S50270
Crafco Sealing Foot/Flush
Used for random asphalt and concrete cracks
S27154 Sealing tip/ft assembly 1/4" flush
S27155 Sealing tip/ft assembly 3/8" flush
Crafco Sealing Foot/Protruded
Used for straight asphalt and concrete joints
S27159 Sealing tip/ft assembly 1/4" protruding
S27160 Sealing tip/ft assembly 3/8" protruding
Crafco Joint Sealing Tip
Use for straight and concrete joints
S27146 Sealing tip assembly 1/4"
S27147 Sealing tip assembly 3/8"
Crafco Round Sealing Tip
Multi-purpose for random cracks and joints. Use with a squeegee for most applications
S27170 Sealing tip assembly 3/8"
S27171 Sealing tip assembly 1/2"
Crafco Sealing Applicator Disk
Used for over banding
S27161 2" Fiber applicator disk assembly
S27162 3" Fiber applicator disk assembly
S27163 4" Fiber applicator disk assembly
S27164 6" Fiber applicator disk assembly
PATCHING TOOLS
Crafco Squeegee S27199
Crafco Replacement Blade S27195 (4 in. X 18 in. X 3/8 in.)
Used for leveling crack sealant and where a sealant over band is recommended
Crafco Compact Squeegee S27245
Crafco Replacement Blade S27241 (2-1/2 in. X 17 in. X 3/8 in.)
Used for leveling crack sealand and where a sealant over band is recomended.
Crafco Compact Squeegee S27245
Crafco Replacement Blade S27241 (2-1/2 in. X 17 in. X 3/8 in.)
Used for leveling crack sealand and where a sealant over band is recomended.
Note: Sherwin Industries, Inc. is the master distributor in the following states for new Crafco Equipment and sealants: Wisconsin, Illilnois, Indiana, Michigan, North Carolina, South Carolina and Virginia. We sell used equiment anywhere in the USA and Sherwin markets Crafco Jet Air Portable Pot Hole Patcher Preservation Systems in Wisconsin, North and South Carolina, Michigan, Indiana and Virginia only.
|
|
Products 
