|
| S31004 Crack-Stix 1/2" in diameter, 150 lineal feet
Crack-Stix is a direct fired, rubberized crack and joint sealant. Easy to use, melts in minutes. Super resilient, self-bonding to asphalt or concrete and self-leveling. It is a rubberized sealant on a spool. Simply the right choice for small repairs.
Permanent Pavement Repair
Patent Pending
Elastomeric Compound
Polymer Modified
Seals In it...
Not on it....
Less waste
Technology Breakthrough
Now for the first time, Industry professionals can get contractor-type results in 3 easy steps using 3 tools. Crack Stix come in ¼, ½, & ¾ inch sizes. They are User Friendly and Ready-To-Use: no mixing, nothing to add, just uncoil, cut-to-length, pack, & heat. Crack Stix are flexible and can be stretched and shaped to custom fit the repair. The rubberized compound melts/liquefies instantly and cures quickly (traffic ready in less than 20 minutes). The self-leveling sealant goes inside the crack... not over the crack... less waste, no tracking or unsightly residue. The Multi-Use formula can be used on asphalt & concrete pavement.
Why HOT, Direct HEAT Process?
In the past, most contractors have had no choice but to use cold-pour or caulking type fillers. Cold applied products fill from the bottom-up and do not permanently bond/seal to the crack sidewalls. Crack Stix are hot applied, using a direct heat process (patent pending). Crack Stix form a permanent bond to the sidewalls of the crack or joint & provides a (liquid rubber) 100% water-tight seal. This seal will remain flexible and intact through the winter and summer expansion/contraction cycles.
3 Easy Steps...
Clean It: Take a screwdriver and scratch out all debris from inside the crack, then take a whisk broom and sweep it clean. Crack must be dry.
Pack It: Uncoil and cut the appropriate size stix and shape/pack into crack with fingertip pressure. Using the screwdriver, press the stix into crack approximately 1/6" to 1/8" below actual pavement surface level. To achieve a neat overall appearance, do not overfill crack. The material seals in it, not on it.
Melt It: Take propane torch and light it. Adjust bright blue part of flame to 1" long. Holding the flame 1-1/2" from stix, move the flame from side to side in a slow & even motion, heating no more than one foot at a time (melt stick until liquid). Seal cures in 20 minutes and is ready for traffic.
|
|
Areas of Use
Cracks and joints asphalt/concerete lots and walkways
Garage concrete slab/asphalt driveway joint seam
Parking garage/decks ... minimize leaks
Water main/Public utility asphalt repair joint seams
Recreation facilities - tennis, basketball, volleyball, shuffleboard, or any other recreational surface
Excellent for fence & net post footings
Curb and gutter flow lines
Touch-up repairs
|
CSX 900 Torch - for use with Crack Stix
SCSX900 Torch
Burns propane or MAPP gas
Operates continuously for over an hour on a 14.1 oz. cylinder
Machined brass fuel valve for precision gas flow control
Rugged torch design with soft comfort grip handle
Ergonomically balances with a fuel cylinder attached
|
|
|
|
|
Products 
